Çağrı Flooring
ARDEX K 80
Industrial Levelling Compound
Ideal for creating wear surfaces for heavy duty applications Easy to install – 5mm to 50mm thickness in one application Quick drying – Walkable in 2 hours Suitable for Residential, Commercial and Industrial applications. ARDEX K80 is a rapid hardening, rapid drying, self levelling compound designed to resurface indoor concrete floors.
ARDEX K80 produces a wear surface suitable for commercial and industrial areas including warehouse floors, parking garages and utility areas. ARDEX K80 can be walked on after approximately 2 hours and coated after 24 hours and subjected to heavy traffic after 48 hours.
SUBSTRATES
ARDEX K80 is designed for installation over dry, internal, concrete subfloors.
HEALTH & SAFETY
ARDEX K80 contains Portland cement and Quartz sand. Avoid generation of dust. Do not inhale dust. Avoid con- tact with eyes or skin. Wear suitable protective gloves and safety glasses.
In case of contact with eyes, rinse opened eye for several minutes under running water. In case of contact with skin, rinse effected areas thor- oughly with running water.
If dust is inhaled, remove to fresh air, ensure breathing passages are clear, and rinse mouth with running water. If symptoms persist, seek medical advice.
Çağrı Flooring
ARDEX K11 T MIX
Industrial Levelling Compound
Produces a smooth, flat, absorbent surface for the subsequent laying of all kinds of flooring materials
Cement-based Levelling and smoothing of floor areas
For thicknesses up to 20 mm in one application
Self-smoothing Pumpable
Early trafficable Ready to receive floor finishes starting from 24 hours
Suitable for floors with underfloor heating Ideal for use with
ARDEX floorcovering adhesives
Low odour & low organic emissions.
DESCRIPTION
ARDEX K11 T MIX is a rapid hardening self levelling compound, walkable after approximately 3,5 – 4 hours Grey powder with special cements, high quality synthetic resins, selected fillers and other special additives.
AREAS of APPLICATION
Dry, internal, cementitious sub-floors; Filling, smoothing and levelling of concrete slabs and cementitious screeds prior to application of floor coverings such as vinyl, linoleum, carpet, ceramic tiles and floating timber floors.
Çağrı Flooring
ARDEX K11 T
Industrial Levelling Compound
Produces a smooth, flat, absorbent surface for the subsequent laying of all kinds of flooring materials
Cement-based Levelling and smoothing of floor areas
For thicknesses up to 10 mm in one application
Self-smoothing Pumpable
Early trafficable Ready to receive floor finishes starting from 24 hours
Suitable for floors with underfloor heating
Ideal for use with ARDEX floorcovering adhesives
Low odour & low organic emissions.
DESCRIPTION
ARDEX K11 T is a rapid hardening self levelling compound, walkable after approximately 2,5 – 3 hours and ready for use after 24 hours for thicknesses up to 5 mm, and in 3 days for thicknesses after 5mm. Grey powder with special cements, high quality synthetic resins, selected fillers and other special additives.
AREAS of APPLICATION
Dry, internal, cementitious sub-floors; Filling, smoothing and levelling of concrete slabs and cementitious screeds prior to application of floor coverings such as vinyl, linoleum, carpet, ceramic tiles and floating timber floors.
CLIENTS
